IVECO EuroTronic Gearbox Fault Codes

IVECO Truck EuroTronic Error Codes DTC Requiring Immediate Engine Shutdown

06 - short circuit to ground at the output Y6 (valve-switch 1/3 gear)

07 - short circuit to ground at the output Y7 (valve switch 2/4 gears)

10 - short circuit to ground at the output at Y10 (main valve)

38 - open circuit at the output of Y6 (valve switch 1/3 gear)

39 - open circuit at the output to Y7 (valve switch 2/4 gears)

42 - open circuit at the output to Y10 (main valve)

57 - no voltage on the emergency unit

77 - short circuit to positive at the output of the PTO1 power take-off

78 - short circuit to positive at the output of the PTO power take-off 2

82 - short to positive at the output of short-term clutch

83 - short to positive at the output of short-term clutch engagement

84 - short circuit to positive at the output of a long clutch

85 - short circuit to positive at the output of the clutch

90 - malfunction of the electronic control unit (communication)

114 - unintentional engagement of the clutch

170 - cutoff relay in the electronic unit does not turn on

Iveco EuroTronic. Error codes that can be read using the emergency unit.

22 - short circuit to ground in the power circuit of the shift lever, display, warning sound signal and speed sensor

54 - open circuit (see error 22)

91 - no signal from the switch sensor

92 - self-tuning error sensor selected gear

93 - error self-tuning sensor node switching range, the position of the gears of the lower range of the GPI

94 - error setting the divider in the low gear position

95 - self-tuning error of at least 2 gears

101 - speed error on both speed sensors (1 + 2)

105 - low voltage

109 - double error in the shift lever

110 - there is no communication between the shift lever and the control unit

117 - error in the process of setting the clutch

118 - clutch does not turn off

119 - clutch does not turn on, torque is not transmitted from the engine

147 - range switching unit does not turn on (GP)

150 - divider does not turn on (GV)

153 - the working cylinder of the switch does not turn on

154 - main gear does not turn off

155 - main gear does not turn on

156 - erroneous gear shift

166-constant idle signal (accelerator pedal)

167 - there is no information about the volume of injected fuel and the position of the accelerator pedal (malfunction of MUX at the input SDI)

169 - cutoff relay in the electronic control unit does not turn off

177 - error in data transmission (information is not transmitted to other systems controlled by the CAN line

181 - data transmission error (information is not transmitted between the engine control unit (EDC) and accelerator pedal

190 - error of the electronic control unit

191 - error of the electronic control unit

192 - error of the electronic control unit