Volvo Trucks logo

Truck's MID 163 Fault Codes DTC

Decryption of codes of malfunctions (DTC). Volvo, Renault, Mack Trucks - MID 163

 

Truck Error Code, Parameter, Description

 

Immobilizer Control Unit

 

MID 163 PID 224 FMI 2

Immobilizer Security Code.

Invalid response from engine control unit. The engine control unit and immobilizer unit are not compatible. In the immobilizer unit installed on the vehicle or in the engine control unit, the program does not correspond to the program for this chassis number.

 

MID 163 PID 224 FMI 12

Immobilizer Security Code.

There is no communication between the immobilizer unit and the engine control unit. Error in the data channel data SAE J1708 or a faulty engine control unit.

MID 163 SID 1 FMI 12

Immobilizer antenna (mounted on the ignition switch).

There is no signal from the antenna. The contacts in the connectors are damaged or oxidized, external signal distortion or the antenna is defective.

 

MID 163 SID 2 FMI 2

Defendant protection system (installed in the ignition key).

Incorrect response from the respondent. Incorrect or faulty transponder, several transponders are located next to the antenna, the transponder is not programmed in the key, or external signal distortion is present.

 

MID 163 SID 2 FMI 12

Defendant protection system (installed in the ignition key).

The immobilizer unit does not receive feedback from the defendant. Incorrect or faulty transponder. The antenna may be defective.

 

MID 163 SID 250 FMI 2

Data channel data SAE J1708.

Conflict of transmitted messages over the information data channel. several blocks simultaneously transmit messages.

MID 163 SID 250 FMI 12

Data channel data SAE J1708.

High traffic information channel. Damaged or oxidized contacts in the connectors, breakage or partial damage to the wires of the data channel. One of the control units may be defective.

 

MID 163 SID 253 FMI 2

Gauge memory, EEPROM.

The storage circuit in the immobilizer block is faulty or an error occurred while programming the data set.

 

MID 163 SID 253 FMI 13

Gauge memory, EEPROM.

Error in key data or faulty storage circuit in immobilizer unit.

Comments: 0